24/7 Phone Services 1-514-519-0568
Your Cart (Items: 0)

No products in the cart.

info@gestionspcstructural.com 4900 Chemin du Coteau-de-Trèfle S, Carignan, QC J3L 0K8

Our Products

CPS/PBV Standoff Bases

Share This Post:


The CPS is a composite plastic standoff base designed for use with hollow or solid wood columns, both indoors and outdoors. The line includes bases for 4×4, 4×6, 5×5, 6×6, 8×8,10×10 and 12×12 columns. All sizes are tested and load rated. The PBV is a hidden standoff post base. Two different shapes fit a variety of post sizes.


  • CPS — engineered composite polymer; PBV — 14-gauge galvanized steel


  • PBV — black powder coat or galvanized



  • Drill a 3/4″-diameter hole, 10″ into the center of the post.
  • Clean out dust. Fill hole halfway with Simpson Strong-Tie® SET-3G epoxy anchoring adhesive.
  • Insert all-thread rod and allow epoxy to set and cure.
  • Secure standoff to post using four 0.148″ x 3″ nails, except PBV which uses four Strong-Drive® SDS Heavy-Duty Connector screws.


  • Drill a 3/4″-diameter hole per anchor design (see table footnote 2).
  • Clean out dust. Fill hole halfway with Simpson Strong-Tie SET-3G epoxy anchoring adhesive. Insert post subassembly into hole and allow epoxy to set and cure.
  • Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non-top-supported installations (such as fences or unbraced carports).

Ordering Information

  • For black powder coat, order PBV6PC or PBV10P
  • For galvanized coating, order PBV6 or PBV10
Home Products Cart Account