CSS-GA is a high-strength, non-corrosive E-glass anchor designed to be field laminated with CSS-ES saturant resin to create a glass fiber-reinforced polymer (GFRP) composite anchor for enhanced detailing of CSS fabrics.
- High strength
- Ambient cure
- Low aesthetic impact
- Various finish coatings
- Seismic retrofit
- Load rating upgrade
- Damage repair
- Defect remediation
- Blast mitigation
- Store material in a dry area with no exposure to moisture.
- 10 years in unopened, undamaged carton
CSS-GA are special-order E-glass anchors available in the diameters listed below in custom lengths in folded versions for termination anchoring and unfolded versions for through anchoring. Please contact Simpson Strong-Tie for ordering instructions.
|Part #||Diameter||Saturating Rates1|
|CSS-GA25X||1/4″ (6.4 mm)||0.2 US gal. (0.6 L)|
|CSS-GA37X||3/8″ (9.5 mm)||0.4 US gal. (1.4 L)|
|CSS-GA50X||1/2″ (12.7 mm)||0.7 US gal. (2.5 L)|
|CSS-GA62X||5/8″ (15.9 mm)||1.0 US gal. (3.9 L)|
|CSS-GA75X||3/4″ (19.1 mm)||1.5 US gal. (5.6 L)|
|CSS-GA87X||7/8″ (22.2 mm)||2.0 US gal. (7.6 L)|
|CSS-GA100X||1″ (25.4 mm)||2.6 US gal. (9.9 L)|
|CSS-GA112X||1 1/8″ (28.6 mm)||3.3 US gal. (12.5 L)|
|CSS-GA125X||1 1/4″ (31.8 mm)||4.1 US gal. (15.5 L)|
|CSS-GA137X||1 3/8″ (34.9 mm)||5.0 US gal. (18.7 L)|
|CSS-GA150X||1 1/2″ (38.1 mm)||5.9 US gal. (22.3 L)|
1. Saturating rates based on 100 anchors (12″ long) saturated with CSS-ES and are highly dependent on saturating method, waste, etc.