24/7 Phone Services 1-514-519-0568
Your Cart (Items: 0)

No products in the cart.

info@gestionspcstructural.com 4900 Chemin du Coteau-de-Trèfle S, Carignan, QC J3L 0K8

Our Products

HETAL Heavy Embedded Truss Anchor (for Lateral Loads)

Share This Post:

Description

The HETAL provides an engineered method to attach roof trusses securely to concrete and masonry walls. This heavy embedded truss anchor works specifically to support lateral loads and features a staggered nail pattern to strengthen uplift resistance. The HETAL also features a built-in moisture plate that sits above the concrete or masonry wall.

Key Features

  • The strap can be installed straight or field-bent around truss or rafter members
  • Built-in moisture barrier
  • Load rated for wind and seismic forces

Material

  • Strap 16 gauge, truss seat 18 gauge

Finish

  • Galvanized. Some products available in ZMAX® coating. See Corrosion Information.

Installation

  • Use all specified fasteners; see General Notes.
  • Embedded 5 1/16″.
  • For mislocated truss anchors greater than 1/8″ but less than 1 1/2″ from the face of the truss, a shim must be provided. Shim design by Truss Engineer. When gap is greater than 1 1/2″, install new anchors.
  • Minimum spacing of single anchors is twice the embedment depth for full load. For closer spacing, see loads for double anchor installation.
  • For lateral loads listed, the lowest four nail holes must be filled.
  • Straps do not need to be wrapped over the rafter/truss to achieve tabulated loads, unless noted otherwise.
Home Products Cart Account