24/7 Phone Services 1-514-519-0568
Your Cart (Items: 0)

No products in the cart.

info@gestionspcstructural.com 4900 Chemin du Coteau-de-Trèfle S, Carignan, QC J3L 0K8

Our Products

HWP High-Wind Purlin Hangera

Share This Post:

Description

The HWP is designed to support joists on purlins or beams in both wood and cold-formed steel construction. This top-flange hanger has enhanced uplift and is ideal for high-wind applications. The HWP offers design flexibility and versatility in supporting trusses off of wood or steel and can have a sloped and/or skewed seat up to 45°.

Key Features

  • Modifiable with alteration options including opened/closed top-flange and offset top-flange
  • Top flange may be sloped to a maximum of 35° to accommodate a sloped header
  • Features a solid one-piece top flange that provides extra stability in panelized roof applications

Material

  • 7-gauge top flange and 12-gauge stirrup

Finish

  • Simpson Strong-Tie gray paint. Hot-dip galvanized available; contact Simpson Strong-Tie.

 

Installation

  • Use all specified fasteners.
  • The HWP may be used for weld-on applications. The minimum-size weld is a 1 1/2″-long fillet weld to each side of the top flange; weld size to match hanger material thickness. See General Instructions for the Installer, note k for weld information. Weld-on applications have the maximum allowable capacity listed. Uplift loads do not apply to this application.
  • Non-modified hangers can support joists sloped up to 1/4 :12 using table loads. For joists sloping between 1/4:12 and 3/4 :12 use 85% of the table loads. See technical bulletin Sloped Joist in Non-Sloped Hangers (T-C-SLOPEJST).
  • Web stiffeners are required for these hangers.
  • If joist is shorter than hanger by more than 1/2″ use only 50% of the table loads.
Home Products Cart Account